Download Google Pixel and Pixel XL Stock Firmware

Download Google Pixel and Pixel XL Stock Firmware – Leakite


Google Pixel

Download Google Pixel and Pixel XL Stock Firmware

Collins Edim Google Pixel, Stock Roms

Follow the instructions below carefully to download and learn how to flash stock firmware image on our Google Pixel or Pixel XL smartphone.

Disclaimer: You should already know by now that this content was written just to help you get the best out of your smartphone. But your use of this guide is entirely at your own risk.

  • Unlock your Pixel or Pixel XL’s bootloader. Please note that unlocking the bootloader and restoring to stock will wipe your phone’s data, so backup your apps and data.
  • Download the appropriate factory image package for your Google Pixel XL (codename= marlin), Pixel (codename= sailfish): Click Here
  • Your Pixel (XL) apps and data might be wiped after flashing the factory images. If you don’t want this to happen, install NotePad++ and open the flash-all.bat file (found in the factory image package), and remove the “-w” from the script.
  • Enable Developer options on your Pixel XL: Go to Settings> About phone> Build number and tap it 7 times. Then go back to Settings> Developer options and enable USB Debugging and OEM unlocking.
  • Install Minimal ADB and Fasboot Setup on your computer. When the program prompts you to create a desktop shortcut while installing, allow it. Also, take note of your Minimal ADB and Fasboot Setup installation path/directory, because you’ll need that later.
  • Install the latest Google USB drivers on your computer.
  • Have your Pixel (XL) charged to at least 70%.
Flashing Factory Images on Google Pixel or Pixel XL

Once you have fulfilled the steps above, get started with the following:.

  1. Copy the downloaded factory image zip package (for instance, “”) to Navigate to the Minimal ADB and Fastboot directory.
  2. Now extract the contents of the zip file to the same folder. Your fastboot folder should look like as shown below:
  3. Turn off your device and boot it into the Bootloader Mode. To do so, press and hold the Volume Down + Power buttons until you see a screenshot like shown below.
  4. Now connect your Pixel XL to your computer using the stock USB cable and wait for a few seconds so that the device drivers are installed.
  5. Now launch the Minimal ADB and Fastboot by clicking the desktop shortcut. If you forgot to create the shortcut earlier, go to Windows Start menu> All Programs> Minimal ADB and Fastboot and click it. A command window will pop up.
  6. To ensure that your phone is properly connected, run the following command. You’ll see a code for your device in the command window. adb devices
  7. Now type the following command in the command window and hit the Enter key on your keyboard. flash-all.bat
  8. The installation process will begin and you’ll see a string of outputs for the ongoing processes as shown below: C:Program Files (x86)Minimal ADB and Fastboot>flash-all.bat target reported max download size of 536870912 bytes sending ‘bootloader_a’ (32820 KB)… writing ‘bootloader_a’… (bootloader) Valid bootloader version. rebooting into bootloader… target reported max download size of 536870912 bytes sending ‘radio_a’ (57048 KB)… writing ‘radio_a’… rebooting into bootloader… target reported max download size of 536870912 bytes archive does not contain ‘recovery.img’ archive does not contain ‘vendor_other.img’ wiping userdata… Creating filesystem with parameters: Size: 26663190528 Block size: 4096 Blocks per group: 32768 Inodes per group: 8192 Inode size: 256 Journal blocks: 32768 Label: Blocks: 6509568 Block groups: 199 Reserved block group size: 1024 Created filesystem with 11/1630208 inodes and 146354/6509568 blocks ——————————————– Bootloader Version…: 8996-012001-1608281716 Baseband Version…..: 8996-012511-1609150631 Serial Number……..: xxxxxxxxxxxxxx ——————————————– checking product… checking version-bootloader… checking version-baseband… sending ‘boot_a’ (26481 KB)… writing ‘boot_a’… erasing ‘system_a’… sending sparse ‘system_a’ 1/3 (523506 KB)… writing ‘system_a’ 1/3… sending sparse ‘system_a’ 2/3 (524279 KB)… writing ‘system_a’ 2/3… sending sparse ‘system_a’ 3/3 (512303 KB)… writing ‘system_a’ 3/3… erasing ‘system_b’… sending sparse ‘system_b’ 1/4 (517263 KB)… writing ‘system_b’ 1/4… sending sparse ‘system_b’ 2/4 (514150 KB)… writing ‘system_b’ 2/4… sending sparse ‘system_b’ 3/4 (516790 KB)… writing ‘system_b’ 3/4… sending sparse ‘system_b’ 4/4 (96127 KB)… writing ‘system_b’ 4/4… erasing ‘vendor_a’… sending ‘vendor_a’ (234277 KB)… writing ‘vendor_a’… Setting current slot to ‘a’… erasing ‘userdata’… sending ‘userdata’ (138957 KB)… writing ‘userdata’… rebooting… finished. total time: 128.109s Press any key to exit…
  9. When you’re prompted to press a key, do that. Your phone will reboot automatically.
  10. Be patient! First boot might take close  10 minutes to complete.

Related Posts

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok


Leave a Reply