Gionee Elife E8 firmware stock ROM and flash file free download with flashing and installation guide.
1 Gionee Elife E8 Quick Review
2 Gionee Elife E8 Stock ROM / Firmware
3 Download Gionee Elife E8 Firmware
4 Key Specs
4.1 Main Camera
4.2 Selfie Camera
Gionee Elife E8 Quick Review
Gionee Elife E8 runs on Octa-core 2.0 GHz Cortex-A53 processor and for the display, it has 1440×2560 pixels resolution, while the dimension is 164 x 82.3 x 9.6 mm (6.46 x 3.24 x 0.38 in) and weigh 210 g (7.41 oz).
The device is powered by Android 5.1 (Lollipop), Amigo 3.1 operating system with Octa-core 2.0 GHz Cortex-A53 processor and Mediatek MT6795 Helio X10 (28 nm) chipset. It possesses and 64GB storage, microSDXC.
The device has Single lens of 24 MP, f/2.0, PDAF, OIS primary camera with Dual-LED dual-tone flash, panorama, HDR features and for selfie, it has Single lens of 8 MP, AF.
It comes with Dual SIM (Micro-SIM, dual stand-by), other connectivity and sensors like, microUSB 2.0, USB On-The-Go, Yes, with A-GPS.
This device is powered with a Li-Po 3500 mAh, non-removable battery.
Gionee Elife E8 Stock ROM / Firmware
Gionee stock ROM is an advanced way of factory reset, of course you can’t be able to use hard reset or normal factory reset procedure to unbrick your android device, you’ll always get stuck at bootloop, but once you’ve flashed or installed the recommended stock ROM on your phone, you’ll always recover your phone to normal.
Flashing and installing Gionee Elife E8 Official Stock ROM can help you solve many problem with your Gionee smartphones. If your phone is malfunctioning, dead, or infected with a virus a simple factory reset might not be able to solve the problem.
Download Gionee Elife E8 Flash File
Before you begin flashing your phone, it is important to have all the flash files / tools at hand:
Download Gionee Elife E8 Firmware
Click the download link below to download the StockROM / Firmware
Device: Gionee Elife E8
File Name: Gionee_E8_0301_T5391.zip
File Size: 2 GB
Firmware Download Link:
How to Flash or Install Firmware (ROM)
- Download and extract the Gionee Elife E8 stock firmware package on the computer.
- After extracting the package, you will be able to get the Firmware File, Flash Tool, Driver, and How-to Flash Guide.
- Install the provided USB Driver on the Computer, and if in case USB Driver is already installed, then SKIP this step.
- Follow the How-to Flash Manual to Flash or install the Firmware on your model Device.
|Real Camera Type||Single Lens|
|Rear Video||[email protected]|
|Rear Features||Dual-LED dual-tone flash, panorama, HDR|
|Selfie Camera Type||Single|
|Selfie Sensor(s)||8 MP, AF|
|Storage Capacity||64GB storage, microSDXC|
|RAM (Memory)||3GB RAM|
|Card slot||microSDXC (dedicated slot)|
|SIM||Dual SIM (Micro-SIM, dual stand-by)|
|Dimensions||164 x 82.3 x 9.6 mm (6.46 x 3.24 x 0.38 in)|
|Weight||210 g (7.41 oz)|
Tags: All FirmwareGioneeGionee Firmware